PRODUCT CATEGORIES
-
CNC lathe Machine+
-
CNC machining center+
-
Lathe Machine+
-
Drilling Machine+
-
Milling Machine+
-
Drilling Milling Machine+
-
Band Saw+
Vmc 850 Milling Machine |
Description |
Features:
1. Resin sand castings.
2. Taiwan's three-axis ball screw. (Taiwan silver)
3. Precision lock nut. (Shanghai Yu Kai) (standard)
4. Taiwan-made spindle, Japan NSK bearing, spindle pulley and belt.
(Taiwan Health) 8000 rpm
5. Taiwan-made pressurized cylinder. (Taiwan Hao Orange) (standard)
6. Imported bearings (P4 grade). (standard)
7. Domestic high quality coupling. (Tianjin Longchuang) (standard)
8. Tool magazine 16 bucket knives (Tokyo, Taiwan)
9. X, Y, Z (bottom) stainless steel rail protection. (standard)
10. Imported electronic lubrication pump. (standard)
11. Domestic cooling system water pump, water tank. (standard)
12. Pneumatic components, . (standard)
13. Headstock weight. (standard)
14. System. Huazhong 808D, wide gsk990, Beijing KND2000M4,
15. Machine alarm light (standard)
The machine is equipped with an anti-impact device, which can absorb the vibration caused by the impact caused by the worker's operation error, so as to minimize the damage of the impact and ensure the original accuracy;
The oil and water separation design can effectively separate the lubricating oil from the cutting fluid, and prevent the cutting fluid from deterioration, affecting the processing quality.
CNC Milling Machine Technical Parameters:
1. Resin sand castings.
2. Taiwan's three-axis ball screw. (Taiwan silver)
3. Precision lock nut. (Shanghai Yu Kai) (standard)
4. Taiwan-made spindle, Japan NSK bearing, spindle pulley and belt.
(Taiwan Health) 8000 rpm
5. Taiwan-made pressurized cylinder. (Taiwan Hao Orange) (standard)
6. Imported bearings (P4 grade). (standard)
7. Domestic high quality coupling. (Tianjin Longchuang) (standard)
8. Tool magazine 16 bucket knives (Tokyo, Taiwan)
9. X, Y, Z (bottom) stainless steel rail protection. (standard)
10. Imported electronic lubrication pump. (standard)
11. Domestic cooling system water pump, water tank. (standard)
12. Pneumatic components, . (standard)
13. Headstock weight. (standard)
14. System. Huazhong 808D, wide gsk990, Beijing KND2000M4,
15. Machine alarm light (standard)
The machine is equipped with an anti-impact device, which can absorb the vibration caused by the impact caused by the worker's operation error, so as to minimize the damage of the impact and ensure the original accuracy;
The oil and water separation design can effectively separate the lubricating oil from the cutting fluid, and prevent the cutting fluid from deterioration, affecting the processing quality.
CNC Milling Machine Technical Parameters:
Item | Unit | VMC850 |
X axis travel | mm | 800 |
Y axis travel | mm | 500 |
Z axis travel | mm | 500 |
Spindle nose to table | mm | 120-620 |
Spindle nose to column | mm | 550 |
Max. X rapid feed | m/min | 24 |
Max. Y rapid feed | m/min | 24 |
Max. Z rapid feed | m/min | 15 |
Cuttting feed | mm/min | 1-10000 |
Torque (X/Y/Z) | N.m | 10/10/15 |
Table size | mm | 1000x500 |
Table max load | kg | 500 |
T slot | mm | 5-18-90 |
Spindle type | Belt | |
Spindle speed | rpm | 50-8000 |
Spindle bore | mm | 120 |
Spindle taper | BT40 | |
Pull stud | MAS403-40BT-1 | |
Spindle motor synchronizing wheel |
Taiwan | |
Spindle belt | Taiwan | |
Main motor | kw | 7.5/11 |
Positioning accuracy (JIS) | mm | ±0.015/300 |
Repeatibility (JIS) | mm | ±0.0075 |
Machine size | mm | 2650x2300x2450 |
Weight | kg | 5200 |
Related Products |