CA6150 CA6250 Lathe Machine
The main performance characteristics：
1 Machine tool head box and bed, tailstock, Supporting plate, etc. the combination of surface between manual scraping, machine to undergo a rigorous inspection, effectively ensure the machine tool accuracy and stability.
2 Machine adopts high strength cast iron, copper and chromium special materials are added, the bed width 400mm, bed rail quenching depth up to 4mm, effectively improves the agreeability and stability of the machine.
3 The machine tool bed head box lubrication uses the pump to carry on the circulation forced lubrication, in view of the south hot weather, has guaranteed the bed head box cleanliness and the heat radiation characteristic, has effectively extended the bearing and gear's service life.
4 Wafangdian Bearing is used in machine tool spindle, the spindle through hole diameter 80mm, machine tool gear with precision grinding, can effectively improve the hardness of the gears, to reduce noise of the machine.
5 Machine tool uses the domestic brand lead screw, the silk mother uses the high quality bronze alloy to guarantee the wear-resisting property and the precision maintenance.
6 The machine adopts high strength four station turret shank size: 25x25mm.
1 CA series ordinary horizontal lathe is used to turning internal and external cylindrical surface, conical surface, and other rotating surface, turning various metric and inch, modulus and pitch thread, and the pitch diameter of the thread and pull the drilling and oil tank etc., is general very strong horizontal lathe, Widely applicable batch processing of various shaft and disc parts.
2 The series lathe bed width in general lathe, 400mm rail width has higher stiffness, rail surface by intermediate frequency quenching, wear-resistant durable.
3 Handy machine operator concentration, slide plate is provided with a quick moving mechanism. Using single handle operation, humanization.
4 The rigidity of the machine tool structure and the transmission stiffness are higher than the general lathe, the power utilization rate is high, which is suitable for the strong cutting.
5 Before leaving the machine tool factory, the machine tool is tested strictly according to the inspection procedure, and the machine tool is tested to ensure that the machine tool has good stability and reliability.
Product main technical parameters:
|Specifications||CA6150 CA6150B CA6150C||CA6250 CA6250B CA6250C|
|Max. Swing over bed||500mm|
|Max. Swing over carriage||300mm|
|Max. swing in gap||--||720mm|
|Effective gap length||--||210mm|
|Max. length of work piece||750mm/1000mm/1500mm/2000mm/2200mm/3000mm/4000mm|
|Width of bed||400mm|
|Section of turning tool||25x25mm|
|Hole through spindle||52mm. （80mm）. [105mm]|
|Spindle taper||NO.6（MT6）（Φ90 1：20）[Φ113 1：20]|
|Feed||Number of feeds||64（kinds）（for each）|
|Range of metric threads（kinds）||（1-192mm）44kinds|
|Range of inch threads（kinds）||（2-24tpi）21kinds|
|Range of module threads（kinds）||0.25-48(Moduie39kinds)|
|Range of pitch threads（kinds）||1-96DP（37kinds）|
|Cross slide travel||320mm|
|Top slide travel||140mm|
|Tailstock||Max. tail stock spindle travel||150mm|
|Tail stock spindle diameter||75mm|
|Taper of tail stock spindle center hole||NO.5(MT5)|
|Packing dimensions (L*W*Hmm)||Overall dimensions for750mm||2550x1140x1750|
|Overall dimensions for1000mm||2700x1140x1750|
|Overall dimensions for1500mm||3200x1140x1750|
|Overall dimensions for2000mm||3700x1140x1750|
|Overall dimensions for2200mm||4030x1140x1750|
|Overall dimensions for3000mm||4850x1140x1750|
|Overall dimensions for4000mm||5800x1140x1750|
|Weight (kg)||Length||G.W N.W.|
|Weight for 750mm||2100 1990|
|Weight for 1000mm||2190 2070|
|Weight for 1500mm||2350 2220|
|Weight for 2000mm||2720 2570|
|Weight for 2200mm||2800 2600|
|Weight for 3000mm||3300 3200|
|Weight for 4000mm||3500 3400|