+86 18663288651 sljczz@163.com 18663288651
Site: 首页>>product>>Lathe Machine>>Lathe Machine

CA6166 CA6266 Lathe Machine


Product Features :
1. Machine headstock and bed. Tail seat. Manually scrape the tray between the joints. The machine has been rigorously tested to ensure the accuracy and stability of the machine.
2. The machine tool uses high-strength cast iron and adds special materials such as copper and chrome. The bed rail width is 400mm and the bed rail quenching depth is 4mm, which effectively improves the wear resistance and stability of the machine tool.
3, head bed box lubrication using cycloidal pump for cyclic forced lubrication. It protects the headboard from the clean and heat-dissipating properties of the hot southern weather, effectively extending the life of bearings and gears.
4. The machine tool spindle adopts Wafangdian bearing, the spindle through hole is φ52mm, and the machine tool gear adopts precision grinding, which effectively improves the gear hardness and reduces the machine noise.
5. The machine tool adopts domestic brand screws, and the silk mother adopts high-quality bronze alloy to ensure wear resistance and precise maintenance.
6. The machine tool adopts four-station high-strength tool holder. The tool holder size is 25x25mm.

1 CA series of ordinary horizontal lathe is suitable for turning inside and outside cylindrical surface, conical surface and other rotating surface, turning various metric and inch, modulus and pitch thread, and can carry out the work of drilling and pulling oil groove, is a very versatile horizontal lathe, widely used in all kinds of shaft and disc parts of the batch processing.
2 This series of lathe bed width in general lathe, rail width 400mm has a high stiffness; guide rail surface is quenched by medium frequency, and is durable.
3 The machine operation is flexible and concentrated, the apron with fast moving mechanism. Using single handle vivid of the operation, pleasant and good..
4 Machine tool structure rigidity and transmission rigidity are higher than the general lathe, the power utilization ratio is high, is suitable for the strong cutting.
5 Machine tool factory in strict accordance with the test procedures for testing, and make a strong cutting test, to ensure that the machine has a good accuracy and reliability. 

Turning Lathe Technical Parameters:
Specifications CA6166 CA6266
Max. Swing over bed 660mm
Max. Swing over carriage 400mm
Max. swing in gap -- 880mm
Effective gap length -- 210mm
Max. length of work piece 750mm/1000mm/1500mm/2000mm/2200mm/3000mm/4000mm
Width of bed 400mm
Section of turning tool 25x25mm
Spindle Spindle speeds 10-1400rpm/16-1400rpm(24steps)
Hole through spindle 52mm. (B:80mm). [C:105mm]
Spindle taper NO.6(MT6)(B:Φ90 1:20)[C:Φ113 1:20]
Feed Number of feeds 64(kinds)(for each)
Range of metric threads(kinds) (1-192mm)44kinds
Range of inch threads(kinds) (2-24tpi)21kinds
Range of module threads(kinds) 0.25-48(Moduie39kinds)
Range of  pitch threads(kinds) 1-96DP(37kinds)
Tailstock Max. tail stock spindle travel 150mm
Tail stock spindle diameter 75mm
Taper of tailstock spindle center hole NO.5(MT5)
Main motor 7.5KW(10HP)
Packing dimensions (L*W*Hmm)
Overall dimensions for750mm 2550x1140x1750
Overall dimensions for1000mm 2700x1140x1750
Overall dimensions for1500mm 3200x1140x1750
Overall dimensions for2000mm 3700x1140x1750
Overall dimensions for2200mm 4030x1140x1750
Overall dimensions for3000mm 4850x1140x1750
Overall dimensions for4000mm 5800x1140x1750
Weight (kg) Length G.W  N.W.
Weight for 750mm 2380  2260
Weight for 1000mm 2570  2450
Weight for 1500mm 2810  2640
Weight for 2000mm 3050  2880
Weight for 2200mm 3390  3180
Weight for 3000mm 3930  3687
Weight for 4000mm 4580  4200

Related Products  







Contact number:+86 18663288651
WhatsApp:+86 18663288651
Fax: 0632-5810166
Address: No. 999, economic development zone,
               Tengzhou City, Shandong Province